Best Sanitizers

BSX400 Single Boot Scrubber Unit - Wet

The BSX400 is a wet, single boot scrubber. It uses two stationery side brushes and one rotating sole brush to thoroughly clean the boot. The user places one foot at a time into the unit and activates the system by grabbing the hand rail. Diluted cleaning solution is sprayed onto the brushes and transferred onto the boot from a stainless steel venturi dilution valve and metering tip to provide the desired PPM. We recommend using Alpet® No-Rinse Quat Sanitizer with the BSX400 to aid in the cleaning of footwear prior to sanitizing (sanitization can only occur on pre-cleaned footwear). The BSX400 is ideal for tight spaces and low traffic applications.




  • Solid member stainless steel frame construction and hand rail

  • One removable sole brush and two removable vertical side brushes

  • Two stainless steel right angle gearboxes for vertical side brushes

  • Stainless steel electrical enclosure with variable speed drive, timer and e-stop

  • Photo eye sensor mounted on handle for unit activation

  • Stainless steel washdown rated 1/2 hp motor and worm gear reducer

  • Solenoid activated brush spray system with Venturi injector for sanitizer with flow rated at 1.5 Gpm

  • Removable stainless steel access grate

  • Self draining tub with four adjustable feet


Connection Requirements

  • 110V ac, 15 amp electrical connection required
  • 3/8” Nptf cold water connection, 50psi recommended
  • 1.5” Tri-clamp drain connection

BSX400, BSX, BSX Single Boot Scrubber for wet processing plants, single boot scrubber, boot scrubber, wet boot scrubber, wet scrubber, alpet quat, quat, footwear cleaners, footwear scrubber, single boot, rubber boot, cleaning boots, footwear maintenance, industrial maintenance, wet plant, food plant, low traffic, small plant, shoe cleaner for factory haccp, HACCP,

Featuring: Two stationary side brushes and one rotating horizontal sole brush


Product # Size/Description Weight Pounds Dimensions LxWxH
BSX400-DAF Boot Scrubber w/ Sanitary Leveling Feet 200 26x20.5x46



Product # Size/Description Weight Pounds Dimensions LxWxH
USP20115 Brush Fixed 10.5" x 3" (for use with BSX400-DAF) 1.5 12x6x6.5
USP20117 Brush Lower (for use with BSX400-DAF) 5.0 16x14x8

Use Alpet® No-Rinse Quat Sanitizer with the BSX400 to aid in the cleaning of footwear prior to sanitization.

Alpet Quat, Surface Sanitizer, No Rinse, Alpet Quat Surface Sanitizer, Food Contact Surfaces, Surface Sanitizer, Surface Cleaner, Cleaner, Sanitizer

Click Here to learn more