Chemical Transfer Unit

MD20010-MD20015

This Chemical Transfer Unit transfers a single product at up to 5 gal/min (18.9 l/min). Unit is available in two different operating types: manual air button or timer with solenoid valve. Available with your choice of Santoprene, Viton or Kalrez seals. Includes suction and discharges hoses.

Key Features

Transfer product at up to 5 gal/min (18.9 l/min)
Available with Santoprene, Viton, or Kalrez seals
Operate unit by using manual air button, or timer and solenoid valve
Discharge hose: 8 ft. (2.4 m) hose with 1/2 in. (12.7 mm) inside diameter
Non-electric pneumatic operation ideal for transferring most products

Includes

Complete unit with discharge hose and suction line
Mounting hardware for control box
User Manual

Product #	Size/Description
MD20010	Single product transfer unit with Santoprene pump seals and manual air button
MD20011	Single product transfer unit with Santoprene pump seals and timer and solenoid valve
MD20012	Single product transfer unit with Viton pump seals and manual air button
MD20013	Single product transfer unit with Viton pump seals and timer and solenoid valve
MD10014	Single product transfer unit with Kalrez pump seals and manual air button
MD10015	Single product transfer unit with Kalrez pump seals and timer and solenoid valve

Requirements
Compressed air requirements	Air regulator (R25) factory set at 50 psi (3.4 bar). Operating range is 40 to 80 psi (3 to 5 bar) with 2 CFM (56.6 l/min)
Liquid temperature range	40-100˚F (4.4-37˚C)
Electrical requirements WITH TIMER AND SOLENOID VALVE:	120 VAC at 60 Hz, 2 amps (GFCI protected outlet)
WITH MANUAL AIR BUTTON:	None
Operating voltage WITH TIMER AND SOLENOID VALVE:	120 VAC
WITH MANUAL AIR BUTTON:	None
Chemical Compatibility: Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or MSDS for your product.

Supporting Docs

Chemical Transfer Unit